Receiver Type Change & How To Link - FUTABA 4PV Instruction Manual

If the receiver used and the RX type settings are different, change the RX type using the
" RX MODE " function. Which RX type is set can be checked at the HOME screen.
T-FHSS Normal speed
T-FH (NORM)
Receiver Type Change & How To Link
linked and the transmitter ID number is memorized at the receiver so that signals from oth-
er transmitters will not be received. The telemetry type T-
FHSS also simultaneously memorizes the ID number of
the receiver at the transmitter so that data from other re-
ceivers will not be received.
The RX type setting and transmitter and receiver linking
for the edit buttons used.
1
Call the MENU 1 screen from the HOME
screen by moving the (JOG) button up,
down, left or right. Select "RECEIVER" by
moving the (JOG) button up or down, and
display the "RX MODE" screen by pressing
the (JOG) button.
2
Move the cursor to "TYPE: ----" by the (JOG)
button up or down operation, and select the
RX type with the (+) button or (-) button.
When the (JOG) button is pressed for approximately 1 second, an electronic sound is gen-
erated and setting ends.
34
4PV-Eng-06-Initl_set-P33-38.indd 34
T-FHSS High speed
T-FH (HIGH)
Select TYPE with
the (JOG) button.
Select RX type with the (+)
or (-) button.
S-FHSS Normal speed S-FHSS High speed
S-FH (NORM)
Select "RX MODE"
by (JOG) button.
Press the (JOG) button for
approximately 1 second.
Push
S-FH (HIGH)
Push
2016/08/05 9:00:39