FUTABA 4PV Instruction Manual page 77

Brake mixing adjustment
1
(Brake mixing function ON/OFF)
Select the setting item "MODE" of <CH3> for CH3 brake and
"MODE" of <CH4> for CH 4 brake by moving the (JOG) button
up or down, and use the (+) or (-) buttons to set the function to
the "ACT" state.
"INH" : Function OFF.
"ACT" : Function ON.
- When "(4WS OFF)"
if the 4WS function is not set to "OFF".
- When "(ESC INH)"
if the DUAL ESC function is not set to "INH".
- When "(SMX INH)"
if the STR MIX function is not set to "INH".
2
(Brake rate)
Moving the (JOG) button up or down, select "RATE" of <CH3>
for CH3 brake and "RATE" of <CH4> for CH 4 brake, and use
the (+) and (-) buttons to adjust the Brake rate amount.
3
(Delay amount setup)
Moving the (JOG) button up or down, select "DELY" of <CH3>
for CH3 brake, "DELY" of <CH4> for CH 4 brake and "DELY" of
<CH2> for CH 2 brake. Use the (+) and (-) buttons to adjust the
delay amount.
"0" : No delay.
"100" : Maximum delay amount.
4
(3rd & 4th channels brake-A.B.S ON/OFF)
Moving the (JOG) button up or down, select "ABS" of <CH3>
for CH3 brake and "ABS" of <CH4> for CH 4 brake.
Use the (+) or (-) key and set the function to the "ACT" state.
5
When finished with setting, return to the MENU screen by
pressing the (END) button.
Setting Special Mixes
and Gyro MIX (p.84) to the " INH " setting. In order to use 4CH, it is necessary to set
STR MIX (p.74), Dual ESC (p.82) and CPS MIX (p.86) to the " INH " setting.
Dial / Trim Setting
can be controlled with digital dial or digital trim, using the function select trim dial
function (See page 70).
4PV-Eng-08-2-Function-P70-92.indd 77
Brake Mixing "BRAKE"
Function ON/OFF (MODE)
INH, ACT
Select button
- Select with the (+) or (-) but-
tons.
Brake rate (RATE)
0 ~ 100
Initial value:100
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Delay amount (DELY)
(CH3) 0 ~ 100
(CH4) 0 ~ 100
(CH2) 0 ~ 100
Initial value:0
Function ON/OFF (ABS)
INH, ACT
Select button
- Select with the (+) or (-) but-
tons.
2016/08/05
77
9:41:38