A.b.s. Function "Th A.b.s - FUTABA 4PV Instruction Manual

A.B.S. Function "TH A.B.S"

When the brakes are applied while cornering with a 4 Wheel Drive or
other type of vehicle, understeer may occur. Understeer can be elimi-
nated and corners can be smoothly cleared by using this function.
Operation
- When the brakes are applied, the throttle servo will pulse
intermittently. This will have the same effect as pumping the
brakes in a full size car.
- The brake return amount, delay amount, pulse cycle, and
brake duty can be adjusted.
Operation display
During ABS operation, the LED blinks.
Display " TH A.B.S " screen using the following method:
(HOME screen)
Press
- AB.P : Amount of brake return
Sets the rate at which the servo re-
turns versus trigger operation for
brake release. When set to 0 , the
ABS function is not performed.
When set to 50 , the servo returns
50 (1/2) of the trigger operation
amount and when set to 100 , the
servo returns to the neutral posi-
tion.
4PV-Eng-08-1-Function-P45-69.indd 65
(MENU 2 ) (MENU 1 )
(MENU 3 )
Setup items
MODE : Function ON/Off
AB.P : Brake return amount
DELY : Delay amount
TG.P (Trigger point)
A.B.S. Function "TH A.B.S"
(Throttle system)
(TH A.B.S screen)
Press
Select
"TH A.B.S"
Press
CYCL : Cycle speed
TG.P : Trigger point
DUTY : Cycle duty ratio
ABS
DUTY (duty): X and Y ratio
X: (Brake application time)
Trigger operation
Without A.B.S.
With A.B.S.
Y: (Brake return time)
AB.P
(Amount of
brake return)
CYCL (Cycle)
65
2016/08/05 9:35:36