Channel 3/4 "Ch3/Ch4 - FUTABA 4PV Instruction Manual

Channel 3/4 "CH3/CH4"

The channel 3/4 servo position can be set from the this screen. When CH3/4 is assigned
to a trim dial or switch by the trim dial function (p.70) or the switch function (p.72),
When CH3/4 is not assigned to a trim dial or switch, it can be set with this screen.
When CH3/4 is assigned to a switch by the switch function, you cannot adjust the
CH3/4 via the screen.
Display " CH3/CH4 " screen using the following method:
(HOME screen)
Rate/position adjustment on channel menu screen
1
(Function selection)
On each CH3/CH4 screen select CH3 "POSI" or CH4 "POSI"
by moving the (JOG) button up or down.
2
(Position setting/rate adjustment)
Use the (+) and (-) buttons to adjust the channel 3 or channel
4 position.
3
When finished with setting, return to the MENU screen by
pressing the (END) button.
92
4PV-Eng-08-2-Function-P70-92.indd 92
(MENU 1)
(MENU 3)
Press
Channel 3/4 "CH3/CH4"
(MENU 2)
Press
Select
"CH3/CH4"
Display when CH3/4 is assigned to a
switch by the switch function. Cannot
adjust the CH3/4 via the screen.
Channel 3 position (POSI)
Channel 4 position (POSI)
Adjust button
- Adjust with the (+) and (-) but-
- Return to the initial value by
(3/4 channel)
(CH3/CH4 screen)
Press
0~100%
Initial value: 0
tons.
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
2016/08/05 9:41:40