Connection Diagram; Telemetry Function On/Off - FUTABA 4PV Instruction Manual

Transmitter
Signal
T-FHSS Receiver
The telemetry data can be viewed at the HOME screen and telemetry ON/OFF screen. The
telemetry function can also be turned on and off at the telemetry ON/OFF screen. The te-
lemetry ON/OFF and communication status can be checked at the HOME screen.
- Telemetry function :ON
- Receiver ID setting complete.
- Data receiving sensitivity display.
- shows that data cannot be received be-
cause it is outside the data receiving range or
because of the effects of an obstruction or the
receiver power is OFF after receiver ID check.
4PV-Eng-08-3-Function-P93-128.indd 115

Connection diagram

Power battery voltage is
displayed at the transmitter.
Info
Info
HUB
Connect to S.BUS2 Connector
Temperature Sensor
Temperature Sensor
(SBS-01RM)
RPM Sensor
Brushless moter
Voltage Sensor (SBS-01V)

Telemetry Function ON/OFF

The reception strength
High
Low
No signal reception
Receiver -> Transmitter:
The reception strength is shown.
- Telemetry function :ON
- Receiver ID before setting or ID mis-
match.
- When the receiver ID is set, before
ID check in the receiver power OFF
stat.
Telemetry "TELEMETRY"
Info
HUB
Switch
Info
(SBS-01T)
(SBS-01TE)
(SBS-01RB)
RPM Sensor
voltage
Info
Voltage Sensor
Temperature
Sensor
RPM Sensor
Battery voltage is displayed
at the transmitter.
Telemetry function :OFF
2016/08/05
115
10:13:21