Steering Wheel And Throttle Trigger Operation; Digital Trim & Grip Lever Operation - FUTABA 4PV Instruction Manual

Steering Wheel And Throttle Trigger Operation

(CH1: Steering wheel, CH2: Throttle trigger)
Steering Wheel Function:
Throttle Trigger Function: Controls the speed of the model as well as the direction of travel
Throttle trigger function
Pull
Push
Digital Trim Operation
(Initial settings: DT1: Steering trim, DT2: Throttle trim, DT3: Channel 3, DT4: Channel 4, DT5: Steering D/R, DT6: ATL-Brake rate)
Operating by the trim: Push the trim lever to the left or right (up or down). The current po-
sition is displayed on the LCD screen.
DT2
DT4
• Each step is indicated by a tone.
• When the trim exceeds the maximum trim adjustment range, the
beep will change and the servo will not move any farther.
• Steering D/R :The steering left and right servo travels are ad-
justed simultaneously.
• ATL: Decreases the set value when the braking effect is strong
and increases the set value when the braking effect is weak.
Steering And Throttle Trim Operation
With the center trim feature, trim adjustments have no
effect on the maximum servo travel. This prevents the
linkages from binding when adjustments are made.
4PV-Eng-04-Before-P12-28.indd 21
Turns the model right or left.
- forward or reverse.
Forward
brake or back
DT1
DT3
Steering wheel function
Left turn
Left
DT5
DT6
Right turn
Right
Steering trim display
Throttle trim display
ATL display
Steering D/R display
21
2016/08/02 9:06:10