Telemetry "Telemetry - FUTABA 4PV Instruction Manual

2.4ghz t-fhss telemetry system
Table of Contents

Advertisement

Telemetry "TELEMETRY"

With the telemetry system, the running status can be displayed at the transmitter and also
recorded as a data log by mounting various sensor units to the chassis.
The T4PV displays four kinds of information on the HOME screen; receiver power source
(battery) voltage, external power supply (drive battery) voltage, speed, and temperature.
* The telemetry function is compatible with only the T-FHSS system.
* The telemetry function requires a corresponding receiver. (R304SB)
* Only T4PV with R304SB ID registered have a telemetry display.
* Multiple sensors of the same type cannot be used.
The sensor data can be checked at the transmitter by connecting
the telemetry sensor sold separately to the S.BUS2 connector of the
R304SB receiver.
sor. The data of 3 types of sensors and the receiver power supply
voltage can be transmitted by using the 3-way extension cord or
double extension cord sold separately.
The receiver power supply can also be connected to the S.BUS2 connector or each of CH1-
4. A receiver power supply voltage sensor is unnecessary.
*The S.BUS2 system exerts control by connecting multiple gyros, servos and other devices
corresponding to one S.BUS2 connector. Each device is separately controlled by setting the
channel No. or slot No. individually for each device.
A slot No. is also set for telemetry sensors. With the T4PV system, each slot No. of a teleme-
try sensor must be set to its initial value. Since the slot No. can be changed for other aircraft
type transmitters (T4PX, etc.), sensors with changed slot No. will not operate if not returned
to their initial slot No.
When using a sensor that is used with transmitters other than a T4PV, whether or not the
slot No. is set to the initial value given in the sensor instruction manual must be checked at
the changed transmitter (T4PX, etc.). With the T4PV, the set slot No. cannot be checked or
changed. So, essentially, if a sensor has been used in a 4PX, and you want to use the same
work in your 4PV.
114
4PV-Eng-08-3-Function-P93-128.indd
Telemetry "TELEMETRY"
114
(HOME screen)
Telemetry info
2016/08/05
10:13:21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents