Gyro Mixing "Gyro Mix - FUTABA 4PV Instruction Manual

Gyro Mixing "GYRO MIX"

This function is a remote gain function which adjusts the sensitivity of the Futaba car rate
gyro at the T4PV side, and is mixing that uses the 3rd CH to adjust the gyro sensitivity.
When using the T4PV by switching the AVCS and normal modes, use PS1 or PS2 with the
function select switch function (p.72).
For a description of the car rate gyro mounting method and handling, refer to the rate gyro
instruction manual.
Setting Special Mixes
is used, Gyro mixing cannot be used.
Dial / Trim Setting
The gain amount can be adjusted by using the function trim dial function (p.70).
Display " GYRO MIX " screen using the following method:
(HOME screen)
AVCS / NORMAL Modes
The gyro has 2 operating modes: NORMAL mode and AVCS mode. In the AVCS mode, the angle is con-
trolled simultaneously with NORMAL mode rate control (swing speed). The AVCS mode increases straight
running stability more than that of the NORMAL mode. Because the feel of operation is different, choose your
favorite mode.
NORMAL
Countersteers against out-
side force, but cannot cor-
rect the skid direction.
AVCS
Corrects the skidding direc-
tion and forcefully main-
tains the heading.
84
4PV-Eng-08-2-Function-P70-92.indd 84
(MENU 1)
(MENU 3)
Press
Gyro mixing "GYRO MIX"
(Steering system)
(MENU 2)
Press
Select
"GYRO MIX"
Outside
force
Outside
force
(GYRO MIX screen)
Press
2016/08/05 9:41:39