FUTABA 4PV Instruction Manual page 125

(Setting the battery type)
Select the setting item "BATT" by moving the
(JOG) button up or down, and select the mode
by pressing the (+) or (-) button. When changing
the battery type, press the (JOG) button after
thoroughly checking whether or not the mistake
was made again. An electronic beeping sound is
generated and the setting is changed.
Note: If the battery type is changed to the wrong setting, the low
battery alarm will be generated immediately after the change and
operation will become impossible.
If the low battery alarm is generated, please return the setting to just before, or turn off
the power and replace the battery with a fully charged battery or a new dry cell battery.
Then, reset the battery type.
Note: If used with the incorrect setting, a normal low battery alarm will not be gener-
ated and the system may stop before the battery alarm is generated. The usage time
may also become extremely short.
"LiFe2" :Futaba LiFe type battery (FT2F1700B/2100B).
"NiMH5" :Futaba MiMH type battery (HT5F1800B).
"DRY4" :Dry cell battery (alkaline battery recommended) 4 batteries.
"CSTM" :Third party battery is used.
This function is selected by exception when a third party battery is used.
In this case, the low battery alarm voltage is set at the user's own risk.
When "CSTM" is selected, the low battery alarm voltage displayed be-
low can be adjusted. By operating the (JOG) button, move the cursor to
the voltage display, and set the voltage by using the (+) or (-) button.
DRY4
When finished with setting, return to the MENU screen by
pressing the (END) button.
(Adjusting the buzzer tone)
Select the setting item "BUZZER" by moving the
(JOG) button up or down, and use the (+) and (-)
buttons to adjust the tone.
- Decide by referring to the tone at adjustment.
When fi nished with setting, return to the MENU
screen by pressing the (END) button.
4PV-Eng-08-3-Function-P93-128.indd 125
Voltage display
When BATT is set to dry cell
use DRY4 or LiFe2/NiMH5, the
voltage display of the HOME
screen changes.
System Functions "SYSTEM"
Battery Type (BATT)
LiFe2, DRY4, NiMH5, CSTM
LiFe2, NiMH5
Buzzer tone (BUZZER)
OFF, 1~100
Initial value: 92
125
2016/08/05 10:13:23