Servo Reverse "Reverse - FUTABA 4PV Instruction Manual

Servo Reverse "REVERSE"

This function reverses the direction of operation of the servos related to transmitter steer-
ing, throttle, and channels 3/4 operation.
However, when the position set by trim or subtrim shifts from
the center, the center becomes the opposite side.
Display to " REVERSE " screen using the following method:
(HOME screen)
Servo reverse function setting
(Preparation)
- Select the channel to be set by moving the (JOG) button up or
down.
1
(Servo reverse setting)
Use the (+) or (-) button to reverse the servo op-
eration direction.
NOR/REV can also be set by moving the (JOG)
button left or right.
(Each channel can be set similar.)
2
When finished with setting, return to the MENU screen by
pressing the (END) button.
50
4PV-Eng-08-1-Function-P45-69.indd 50
(MENU 2 )
(MENU 3 )
Press
Servo Reverse "REV"
(MENU 1 )
Press
Select
"REVERSE"
Setting item
STR :Steering (1st channel)
THR :Throttle (2nd channel)
CH3 :3rd channel
CH4 :4th channel
(All channel)
(REVERSE screen)
Press
Move the cursor to "STR, THR,
CH3 and CH4" with the (JOG)
button.
Select button
- Select with the (+) or (-) but-
tons.
Or use the jog dial left or right
to set the normal, reverse op-
erations.
2016/08/05 9:35:32