Throttle Mode "Th Mode; Throttle Servo Neutral Position "Sxnt - FUTABA 4PV Instruction Manual

Throttle Mode "TH MODE"

This menu has the following 4 functions:
- Servo neutral mode, which sets the throttle neutral ratio to 7:3 or 5:5.
- Idle up, which raises the idling speed when starting the engine to improve engine starting per-
formance of a gasoline car (boat).
- Throttle off (engine cut), which stops the engine of a boat, etc. by operating the throttle servo to
the low side regardless of the position of the throttle trigger.
Display " TH MODE " screen using the following method:
(HOME screen)

Throttle servo neutral position "SXNT"

from 7:3 or 5:5 by changing the neutral position of the throttle servo.
Forward side
Selecting the throttle servo neutral position
1
(Mode selection)
Select the setting item "SXNT" by moving the (JOG) button up
or down. Select "F5/B5" or "F7/B3" by (+) or (-) button.
"F5/B5"
"F7/B3"
2
When finished with setting, return to the MENU screen by
pressing the (END) button.
88
4PV-Eng-08-2-Function-P70-92.indd 88
(MENU 1)
(MENU 3)
Press
Setup items
：Throttle servo neutral position
SXNT
IDLUP ：Idle-Up rate
F5/B5
Brake side
5 : 5
Throttle Mode "TH MODE"
(Throttle system)
(MENU 2)
Press
Select
"TH MODE"
NTBRK ：Neutral brake rate
THOFF ：Throttle off (engine cut) position
F7/B3
Forward side
7 : 3
Mode selection (SXNT)
Select button
- Select with the (+) or (-) but-
(TH MODE screen)
Press
Brake side
F5/B5, F7/B3
tons.
2016/08/05 9:41:39