FUTABA 4PV Instruction Manual page 118

Setting the temperature
(Preparation)
Select the setting item "TEMP" by moving the (JOG) button up
or down, and display the temperature screen by pressing the
(JOG) button.
1
(Select Celsius or Fahrenheit)
Select the setting item "UNIT" by moving the (JOG) button up
or down, and select Celsius or Fahrenheit temperature display
with the (+) button or (-) button.
"°C" : Celsius.
"°F" : Fahrenheit.
2
(Setting of each item)
Select the setting item "ALRM" by moving the (JOG) button up
or down, and set alarm ON/OFF with the (+) button or (-) but-
ton.
"OFF" : Alarm OFF.
"ON"
3
(Setting the temperature alarm)
Select the setting item "LIMIT" by moving the (JOG) button
up or down, and set the temperature at which the alarm
begins to sound with the (+) button or (-) button.
Select the setting item "TYPE" by moving the (JOG) button
up or down, and set the type of sensor with the (+) button
or (-) button.
"SBS-01T" : Option sensor.
"Temp 125" : Option sensor for Europe.
When fi nished with setting, return to the TELEMETRY screen
by pressing the (END) button.
Setting the gear ratio
(Preparation)
Select "R.P.M" by moving the (JOG) button up or down, and
display RPM screen by pressing the (JOG) button.
1
(Setting the RPM Gear Ratio)
Select the setting item "RATIO" by moving the (JOG) but-
ton up or down, and set the location the sensor is to actu-
ally measure and the gear ratio of the motor and engine
with the (+) button or (-) button. There is no alarm function.
When finished with setting, return to the TELEMETRY
screen by pressing the (END) button.
118
4PV-Eng-08-3-Function-P93-128.indd
Telemetry "TELEMETRY"
118
Display type
°C, °F
- Select with the (+) or (-) but-
tons.
Alarm ON/OFF
ON, OFF
- Select with the (+) or (-) but-
tons.
Temperature alarm
-20~200°C/ -4~392°F
Initial value: 200°C/ 212°F
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Sensor type
SBS-01T, Temp 125
Select button
- Select with the (+) or (-) but-
tons.
Gear ratio (moderating ratio)
0.001~64
Initial value: 1
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
2016/08/05 10:13:22