FUTABA 4PV Instruction Manual page 64

Throttle acceleration adjustment
(Preparation)
- On the TH ACCEL screen make the following adjustments:
1
(Forward acceleration amount adjustment)
Select the setting item FWD "RATE" by moving
the (JOG) button up or down. Use the (+) and (-)
buttons to adjust the acceleration amount.
"0" :No acceleration.
"100" :Maximum acceleration (Approximately 1/2 of the forward side throttle angle).
2
(Brake side acceleration amount adjustment)
Select the setting item BRK "RATE" by moving
the (JOG) button up or down. Use the (+) and (-)
buttons to adjust the acceleration amount.
"0" :No acceleration.
"100" :Maximum acceleration (Brake side maximum throttle angle).
4
When finished with setting, return to the MENU screen by
pressing the (END) button.
Dial / Trim Setting
The throttle acceleration adjustment amount (FWD), (BRK) can be controlled with
digital dial or digital trim. With the function select trim dial function (See page 70).
64
4PV-Eng-08-1-Function-P45-69.indd 64
Throttle Acceleration "TH ACCEL"
Forward acceleration amount
(FWD)
0~100
Initial value: 0
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Brake side acceleration amount
(BRK)
0~100
Initial value: 0
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
2016/08/05 9:35:36