Dual Esc Mixing "Dual Esc - FUTABA 4PV Instruction Manual

Dual ESC Mixing "DUAL ESC"

This function is mixing used with crawlers and other 4WD type vehicles and uses the 2nd
CH to control the front motor controller and the 4th CH to control the rear motor controller.
Front drive only, rear drive only, or both front and rear drive can be selected using any pro-
grammed DT (digital trim) button.
Setting Special Mixes
and CPS Mixing (p.86) are used, this dual ESC Mixing function cannot be used.
Display " DUAL ESC " function screen using the following method:.
(HOME screen)
Dual ESC mixing adjustment
(Preparation)
- This function is used to switch between front
drive/4WD/rear drive using one of the trims (dial).
Set the desired trims (dial) for this function us-
ing the TRIM DIAL screen (p.70).
- DT1 through DT6 or DL1.
1
(Dual ESC setting)
Select the setting item "MODE" by moving the (JOG) button up
or down. Set the function by pressing the (+) or (-) button.
"INH"
: Function OFF.
"ACT" : Function ON.
- When "(STR MIX ACT → INH)" is displayed, the DUAL ESC cannot be used if the
STR MIX function is not set to "INH".
- When "(CPS MIX ACT → INH)" is displayed, the DUAL ESC cannot be used if the
CPS function is not set to "INH".
- When "(BRK4 MIX ACT → INH)" is displayed, the DUAL ESC cannot be used if
the BRAKE MIX (CH3) function is not set to "INH".
82
4PV-Eng-08-2-Function-P70-92.indd 82
(MENU 1)
(MENU 3)
Press
Dual ESC Mixing "DUAL ESC"
(Throttle system)
(MENU 2)
Press
Select
"DUAL ESC "
Setup items
MODE
RATE
MXMD
TRIM
Function TRIM DIAL
Function ON/OFF (MODE)
Select button
- Select with the (+) or (-) but-
(DUAL ESC screen)
Press
: Function ON/OFF
: 4ch rate (Rear side)
: Mix mode
: Trim mode
ESC-MD
The function select trim dial
screen (p.70) can be dis-
played from this screen.
INH, ACT
tons.
2016/08/05 9:41:39