Selecting Items On The Menu Screen; Value Of Each Function And Changing The Set Value - FUTABA 4PV Instruction Manual

Selecting Items On The Menu Screen

The item indicated by the reverse displayed cursor on the screen is selected.
ure shown below is an example of the MENU 1 screen. However, movement of the cursor is
the same in all of the screens.
For instance, if the (JOG) button is pressed when the cursor is at the end point (EPA) on the
MENU 1 screen, the end point (END POINT) function setting screen appears.
Move the cursor
(JOG) button down operation

Value Of Each Function And Changing The Set Value

Values, settings, and other data on all the function setting screens are changed with the (+)
and (-) buttons.
40
4PV-Eng-07-Menu-P39-44.indd 40
On the MENU 1 screen, move the
cursor to "END POINT"
(JOG) button up operation
Example:
Select the channel
to be changed at the
REVERSE screen by
(JOG) button up or
down operation, and
set the servo direction
by selecting "NOR"
or "REV" with the (+)
button or (-) button.
When this is displayed, the setting
can also be changed by (JOG)
button left or right operation.
Press
(END POINT screen)
Example:
When changing the left
side travel of the steering
servo at the END POINT
screen, select LFT of the
STR setting item by (JOG)
button up, down, left, or
right operation, and set
the steering servo coun-
terclockwise travel with
the (+) or (-) button.
Pressing the (+) and (-)
buttons simultaneously
will default to 100.
2016/08/05 9:11:32