Telemetry Sensor Setting - FUTABA 4PV Instruction Manual

If the telemetry function is running, you can listen to the information of the telemetry in the
voice announcement.
Display " TLM VOICE " screen using the following method:
(HOME screen)
Press
The Speech function ON/OFF
1
(Setting of each item)
Select the setting item "RXBATT", "EXTVOL", "TEMP" or
"R.P.M" by moving the (JOG) button up or down, and set
speech ON/OFF with the (+) button or (-) button.
"OFF" : No voice guide.
"ON" : Information loaded by voice.
2
(Language setting)
Select setting item "LANGU" by moving the
(JOG) button up or down, and select "ENG",
"JPN", or "GER" with the (+) button or (-) button.
"JPN" :Japanese.
"ENG" :English.
"GER" :German.
3
(Select the voice volume)
Select the setting item "VOLUM" by moving the (JOG) but-
ton up or down, and select the voice volume with the (+)
button or (-) button.
"LOW" :Low range.
"HI" :High range.
4
When finished with setting, return to the MENU screen by
pressing the (END) button.
4PV-Eng-08-3-Function-P93-128.indd 119
The Speech Function Setting
(MENU 1)
(MENU 3 )
(MENU 2 )
Telemetry "TELEMETRY"
(TLM VOICE screen)
Press
Select
"TLM VOICE"
Press
The voice feature cannot be
used if the telemetry function
is OFF and the receiver type is
set to S-FHSS.
Speech ON/OFF
ON, OFF
Select button
- Select with the (+) or (-) but-
tons.
LANGU
JPN, ENG, GER
Select button
- Select with the (+) or (-) but-
tons.
VOLUM
LOW, HI
Select button
- Select with the (+) or (-) but-
tons.
119
2016/08/05 10:13:22