Exponential Adjustment "Exp - FUTABA 4PV Instruction Manual

Exponential Adjustment "EXP"

This function is used to change the sensitivity of the servo around the neutral position.
Display to " EXP " screen using the following method:
(HOME screen)
Press
STR (Steering EXP)
This function is used to change the sensitivity of the steer-
ing servo and around the neutral position. It has no effect
on the maximum servo travel.
Racers Tip
When the setting is not determined, or the
characteristics of the model are unknown,
start with 0 . (When EXP is set to 0 , servo
movement is linear.)
Steering EXP adjustment
(Preparation)
- On the EXP screen,
button up or down.
1
When you want to quicker steering operation,
use the (+) button to adjust the + side. When
you want to make steering operation milder, use
the (-) button to adjust the - side.
2
When finished with setting, return to the MENU screen by
pressing the (END) button.
4PV-Eng-08-1-Function-P45-69.indd 57
(MENU 2 ) (MENU 1 )
(MENU 3 )
select the setting item "STR" by moving the (JOG)
Exponential Adjustment "EXP"
(Steering/ Throttle system)
(EXP screen)
Press
Select
"EXP"
Press
Setting item
STR :Steering
FWD :Throttle forward side
BRK :Throttle brake/ reverse side
Quick Mild
(Positive side) (Negative side)
Wheel operation
Adjustment range
-100~0~+100
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Vertical cursor moves in step
with steering wheel operation.
Wheel operation
57
2016/08/05 9:35:34