Timer Function "Timer - FUTABA 4PV Instruction Manual

Timer Function "TIMER"

Use the timer by selecting one of the three timers UP TIMER, DOWN TIMER, and LAP
TIMER.
Display " TIMER " screen using the following method:
(HOME screen)
Press
Up timer function
- This function can be used to count the time between start and stop, etc.
- The timer repeatedly starts and stops each time the switch is pressed and
accumulates the time between each start and stop. When the count reach-
es 99 minutes 99 seconds, the count returns to 00 minutes 00 seconds and
is repeated.
- The passage of time is announced by sounding of a buzzer (beep) each
minute after starting.
- Alarm
- Prealarm
- After starting, the timer continues to count and can be stopped by switch even when
the LCD switches to another screen.
4PV-Eng-08-3-Function-P93-128.indd 107
(MENU 1 )
(MENU 2 )
TIMER screen
UP TIMER FUEL DOWN TIMER
UP TIMER function
:Beep sounds at the set time (minute).
:Alarm advance announcement sound. Beeping begins 5 seconds before the alarm (beeps).
Timer Function "TIMER"
(MENU 3 )
Press
Select
"TIMER"
LAP TIMER
(TIMER screen)
Press
2016/08/05
107
10:13:20