4Ws Mixing "4Ws - FUTABA 4PV Instruction Manual

4WS Mixing "4WS"

This function can be used with crawlers and other 4WS type vehicles. It is mixing which
uses the 1st CH to control the front side steering and the 3rd CH to control the rear side
steering.
OFF (front side only), reverse phase, same phase, rear side only and other 4WS type switch-
ing is used by selecting PS2 with the function select switch function (p.72). If not selected,
NO SW is displayed. Therefore, select PS2.
Setting Special Mixes
is used, 4WS Mixing cannot be used.
Display " 4WS " screen using the following method:
(HOME screen)
Reverse phase
4WS mixing adjustment
(Preparation)
Since this function is used by switching the type of 4WS with
a switch (PS2), the switch used by the function select switch
function (page 72) is set.
80
4PV-Eng-08-2-Function-P70-92.indd 80
(MENU 1)
(MENU 3)
Press
Same phase
4WS Mixing "4WS"
(Steering, 3rd channel system)
(MENU 2)
Press
Select
"4WS "
Rear side only
Setup items
Function SW
(4WS screen)
Press
Front side only
（4WS OFF）
MODE ：4WS Type
RATE ：3ch rate (Rear side)
MXMD ：Mix mode
4WS
2016/08/05 9:41:38