Display When Power Switch Is Turned On; Lcd Screen Contrast; Power Off Forgotten Alarm - FUTABA 4PV Instruction Manual

Display When Power Switch Is Turned On

Model name (10 characters)
The current receiver mode is

LCD Screen Contrast

The LCD screen contrast can be adjusted. (For more information, see page 123.)
Caution
Do not adjust the contrast so that the LCD is too bright or too dark.
When the display cannot be read due to a temperature change, data cannot be set.
Power Off Forgotten Alarm & Auto Power Off
When the steering wheel, throttle trigger, push switch, or edit button are not operated for 10
minutes (default), an alarm sounds and " NOT OPERATED FOR A LONG
TIME " is displayed on the LCD screen.
When the steering wheel, throttle trigger, push switch, or edit button are op-
erated, the alarm is reset. If the alarm is not reset, the auto power off func-
tion will automatically turn off the power after 5 minutes. If the system is
not to be used, turn off the power.
The function can be deactivated at the system menu (p.123).
20
4PV-Eng-04-Before-P12-28.indd 20
Power switch turned on
HOME screen shown below appears.
Timer
Model number
displayed.
Telemetry data
Battery voltage
Telemetry function :ON/OFF
Receiver -> Transmitter:
The reception strength is shown.
ST :Steering trim display
TH :Throttle trim display
D/R :Steering D/R display
ATL :Throttle ATL display
Servo operation of each channel
can be checked.
2016/08/02 9:06:10