Programmable Mixing "Prog Mix - FUTABA 4PV Instruction Manual

Programmable Mixing "PROG MIX"

This function allows you to apply mixing between steering, throttle, channel 3 and channel 4.
Additional Functions
-When the steering or throttle channel is the master channel (channel that applies mix-
ing), trim data can be added (Trim mode).
- The mixing mode selection (Master mixing mode).
Relating function
steering :EPA, STR EXP, D/R, SPEED, 4WS
throttle :EPA, THR EXP, ATL, ABS, SPEED, BRAKE MIX, NT-BRK, ESC MIX, TH ACCEL
CH3 :EPA, BRAKE MIX, 4WS
CH4 :EPA, BRAKE MIX, ESC MIX
Movement of the slave channel side
The movement of the master channel side will be added to the movement of the slave
channel side.
Display " PROG MIX " screen using the following method:
(HOME screen)
Program mixing adjustment
(Preparation)
- When "PROG MIX" is turned ON and OFF by switch, set the
switch by select switch function (p.72).
1
(Mixing function ON/OFF)
Select the setting item "MODE" by moving the (JOG) button up
or down. Use the (+) or (-) and set the function to the "ON" or
"OFF" state.
"INH" : Function OFF.
"ON" : Function ON. When the switch is OFF, "OFF" is displayed.
78
4PV-Eng-08-2-Function-P70-92.indd 78
(MENU 1)
(MENU 3)
Press
Setup items
MODE : Function ON/OFF
LEFT : Mixing rate (Left side)
RGHT : Mixing rate (Right side)
MST : Master channel
Programmable Mixing "PROG MIX"
(MENU 2)
Press
Select
"PROG MIX "
SLV : Slave channel
MXMD : Mix mode
TRIM : Trim mode
Function SW
Function ON/OFF (MODE)
Select button
- Select with the (+) or (-) but-
(All channels)
(PROG MIX screen)
Press
PROGMIX
INH,ON (OFF)
tons.
2016/08/05 9:41:38