Direct Model Call - FUTABA 4PV Instruction Manual

This function enables the registered model memory to be called when you turn on the pow-
er while operating DT5 or DT6, which are located on the T4PV grips. With this function,
you can call the model memory which is different from the memory at the end of the previ-
ous operation without having to use the model selection function. DT5 and DT6 can be reg-
istered for right and left respectively for 4 models.
Press and hold digital trim(s) 5 or 6 while powering on the transmitter to select the optional
models.
Display " DIRC MDL " screen using the following method:
(HOME screen)
Registration method of model memory
1
Select the setting item "DT5L", "DT5R", "DT6L", or "DT6R" by
the (JOG) button up or down operation.
"DT5L" :Push the DT5 trim lever to the left
"DT5R" :Push the DT5 trim lever to the right
"DT6L" :Push the DT6 rrim lever to the left
"DT6R" :Push the DT6 trim lever to the right
2
Select the model memory number to be assigned by (+) or (-)
button.
3
When finished with setting, return to the MENU screen by
pressing the (END) button.
44
4PV-Eng-07-Menu-P39-44.indd 44

Direct Model Call

DT5L
DT6L
(MENU 1)
(MENU 2)
Press
DT5R
DT6R
(MENU 3)
Select
"DIRC MDL"
(CH3/CH4 screen)
Press
Press
Select the setting item DT5L/
D T5R , D T6L / D T6R " b y t h e
(JOG) button operation. Use
the (+) or (-) and set the func-
tion to the appropriate model
number you wish to have pro-
grammed to the switch.
2016/08/05 9:11:33