FUTABA 4PV Instruction Manual page 108

2.4ghz t-fhss telemetry system
Table of Contents

Advertisement

Fuel down timer function
- This function is primarily used to check the refueling time of a gasoline
car. (The remaining time is displayed.)
- Each time the switch is pressed, the timer is restarted and the set time is
reset. The start time becomes the alarm set time. (When counted down to
00 minute 00 second, the down timer becomes an up timer.)
- The down timer can be initially started by throttle trigger.
- The passing of time is indicated by sounding of a buzzer (beep) each
minute after starting.
- Alarm
- Prealarm
- After starting, the timer continues to count even if the LCD switches to another screen.
Lap timer function
- Each lap time can be memorized by switch operation. (100 laps)
- The race time can be set. Switch operation after the time set by alarm has elapsed auto-
matically stops the timer. The passing of time is indicated by sounding of a buzzer (beep)
each minute after starting.
-Alarm
Prealarm
- The lap timer can be started by throttle trigger.
(LAP TIMER operation)
- The lap timer is started by switch or throttle trigger.
- Number of laps (LAP): After starting, the timer is counted up and the lap time blinks for 3 sec-
onds each time the switch is pressed. To prevent erroneous counting, switch operation is not ac-
cepted during this period. When 1 lap exceeds 10 minutes, counting is repeated from 0.
- Lap list: Up to 10 lap times are memorized beginning from lap list 1. After lap memory "100", operation returns
to lap memory "1" and the lap memories are overwritten.
- The lap time data memorized in the lap memories can be checked with the lap list screen (p.113). The entire
lap list data is cleared the next time the lap timer is started.
108
4PV-Eng-08-3-Function-P93-128.indd
FUEL DOWN TIMER function
:A beep sounds at the set time (minute).
:Alarm advance announcement sound. Beeping begins 5 seconds before the alarm (beeps).
LAP TIMER
:Beep sounds at the set time.
:Alarm advance announcement sound. Sounding begins 5 seconds before the alarm (beeps).
Timer Function "TIMER"
108
2016/08/05
10:13:21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents