Comnet CWGE24MS2 Installation And Operation Manual page 75

INSTALLATION AND OPERATION MANUAL
Node Command
configure clear igmp-counters
configure clear igmp-counters
(port|vlan)
interface igmp-querier-mode
(auto|fixed|edge)
interface igmp-immediate-leave This command enables the IGMP Snooping immediate leave function
interface no igmp-immediate-
leave
interface igmp-snooping group-
limit VALUE
interface no igmp-snooping
group-limit
configure interface range
gigabitethernet1/0/
PORTLISTS
if-range igmp-immediate-leave This command enables the IGMP Snooping immediate leave function
if-range no igmp-immediate-
leave
if-range igmp-snooping group-
limit VALUE
if-range no igmp-snooping
group-limit
if-range igmp-querier-mode
(auto|fixed|edge)
Example:
CWGE24MS2(config)#igmp-snooping enable
CWGE24MS2(config)#igmp-snooping vlan 1
CWGE24MS2(config)#igmp-snooping querier enable
CWGE24MS2(config)#igmp-snooping querier vlan 1
CWGE24MS2(config)#interface 1/0/1
CWGE24MS2(config-if)#igmp-immediate-leave
CWGE24MS2(config-if)#igmp-querier-mode fixed
CWGE24MS2(config-if)#igmp-snooping group-limit 20
TECH SUPPORT: 1.888.678.9427
Description
This command clears the IGMP snooping counters.
This command clears the IGMP snooping counters for port or vlan.
This command specifies whether or not and under what conditions
the port(s) is (are) IGMP query port(s). The Switch forwards IGMP join
or leave packets to an IGMP query port, treating the port as being
connected to an IGMP multicast router (or server). You must enable
IGMP snooping as well. (Default:auto)
for the specific interface.
This command disables the IGMP Snooping immediate leave function
for the specific interface.
This command configures the maximum groups for the specific
interface.
This command removes the limitation of the maximum groups for the
specific interface.
This command enters the interface configure node.
for the specific ports.
This command disables the IGMP Snooping immediate leave function
for the specific ports.
This command configures the maximum groups for the specific ports.
This command removes the limitation of the maximum groups for the
specific ports.
This command specifies whether or not and under what conditions
the ports is (are) IGMP query port(s). The Switch forwards IGMP join
or leave packets to an IGMP query port, treating the port as being
connected to an IGMP multicast router (or server). You must enable
IGMP snooping as well. (Default:auto)
CWGE24MS2
INS_CWGE24MS2_REV–
10/05/16 PAGE 75