Tech Support: 1.888.678.9427 - Comnet CWGE24MS2 Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL
CLI Configuration
Node Command
enable show dual-homing
configure dual-homing (disable | enable)
configure dual-homing primary-channel
(port|trunk) VALUE
configure no dual-homing primary-channel This command removes the dual-homing primary
configure dual-homing secondary-channel
(port|trunk) VALUE
configure no dual-homing secondary-
channel
Example:
CWGE24MS2(config)# link-aggregation 1 ports 5-6
CWGE24MS2(config)# link-aggregation 1 enable
CWGE24MS2(config)# dual-homing primary-channel port 2
CWGE24MS2(config)# dual-homing secondary -channel trunk 1
CWGE24MS2(config)# dual-homing enable

TECH SUPPORT: 1.888.678.9427

Description
This command displays the dual-homing information.
This command disables / enables the dual-homing
function for the system.
This command sets the dual-homing primary channel for
the system. The channel can be a single port or a trunk
group.
channel for the system.
This command sets the dual-homing secondary channel
for the system. The channel can be a single port or a
trunk group.
This command removes the dual-homing secondary
channel for the system.
CWGE24MS2
INS_CWGE24MS2_REV–
10/05/16 PAGE 134