Comnet CWGE24MS2 Installation And Operation Manual page 255

INSTALLATION AND OPERATION MANUAL
CWGE24MS2(config)#snmp system-location Branch-Office
Web Configuration
SNMP Setting:
Parameter
SNMP State
System Name
System Location
System Contact
Apply
Refresh
TECH SUPPORT: 1.888.678.9427
Description
Select Enable to activate SNMP on the Switch.
Select Disable to not use SNMP on the Switch.
Type a System Name for the Switch.
(The System Name is same as the host name)
Type a System Location for the Switch.
Type a System Contact for the Switch.
Click Apply to configure the settings.
Click this button to reset the fields to the last setting.
CWGE24MS2
INS_CWGE24MS2_REV–
10/05/16 PAGE 255