Tech Support: 1.888.678.9427 - Comnet CWGE24MS2 Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL
CLI Configuration
Node Command
enable show link-aggregation
configure link-aggregation [GROUP_ID]
(disable | enable)
configure link-aggregation [GROUP_ID]
interface PORTLISTS
configure no link-aggregation [GROUP_ID]
interface PORTLISTS
Example:
CWGE24MS2#configure terminal
CWGE24MS2(config)#link-aggregation 1 enable
CWGE24MS2(config)#link-aggregation 1 ports 1-4

TECH SUPPORT: 1.888.678.9427

Description
The command displays the current trunk
configurations.
The command disables / enables the trunk
on the specific trunk group.
The command adds ports to a specific
trunk group.
The commands delete ports from a
specific trunk group.
CWGE24MS2
INS_CWGE24MS2_REV–
10/05/16 PAGE 144