Comnet CWGE24MS2 Installation And Operation Manual page 39

INSTALLATION AND OPERATION MANUAL
Default Settings
The default MAC address table age time is 300 seconds.
The Maximum static address entry
CLI Configuration
Node Command
enable show mac-address-table aging-
time
enable show mac-address-table
(static|dynamic)
enable show mac-address-table mac
MACADDR
enable show mac-address-table port
PORT_ID
configure mac-address-table static
MACADDR vlan VLANID port
PORT_ID
configure no mac-address-table static
MACADDR vlan VLANID
configure mac-address-table aging-time
VALUE
configure clear mac address-table
dynamic
Example:
CWGE24MS2(config)#mac-address-table static 00:11:22:33:44:55 vlan 1 port 1
TECH SUPPORT: 1.888.678.9427
is 256.
Description
This command displays the current MAC address table age
time.
This command displays the current static/dynamic unicast
address entries.
This command displays information of a specific MAC.
This command displays the current unicast address entries
learnt by the specific port.
This command configures a static unicast entry.
This command removes a static unicast entry from the address
table.
This command configures the mac table aging time.
This command clears the dynamic address entries.
CWGE24MS2
INS_CWGE24MS2_REV–
10/05/16 PAGE 39