Basic Settings; General Settings - Comnet CWGE24MS2 Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL

Basic Settings

General Settings

System
Introduction
Management VLAN
To specify a VLAN group which can access the Switch.
» The valid VLAN range is from 1 to 4094.
» If you want to configure a management VLAN, the management VLAN should be created first
and the management VLAN should have at least one member port.
Host Name
The hostname is same as the SNMP system name. Its length is up to 64 characters.
The first 16 characters of the hostname will be configured as the CLI prompt.
Default Settings
› The default Hostname is CWGE24MS2
› The default DHCP client is disabled.
› The default Static IP is 192.168.10.1
› Subnet Mask is 255.255.255.0
› Default Gateway is 0.0.0.0
› Management VLAN is 1.
TECH SUPPORT: 1.888.678.9427
CWGE24MS2
INS_CWGE24MS2_REV–
10/05/16 PAGE 25