Comnet CWGE24MS2 Installation And Operation Manual page 273

INSTALLATION AND OPERATION MANUAL
» Click "Reset configuration" in web management or do cli command, reload default-config.
» Click "Upload configuration" in web management or do cli command, "archive download-
config xxx".
Firmware
Type the path and file name of the firmware file you wish to upload to the Switch in the File path
text box or click Browse to locate it. Click Upgrade to load the new firmware.
Reboot
Reboot allows you to restart the Switch without physically turning the power off.
Follow the steps below to reboot the Switch.
» In the Reboot screen, click the Reboot button. The following screen displays.
» Click OK again and then wait for the Switch to restart. This takes up to two minutes. This does
not affect the Switch's configuration.
TECH SUPPORT: 1.888.678.9427
CWGE24MS2
INS_CWGE24MS2_REV–
10/05/16 PAGE 273