Figure 4-3: Entering Values From The Decimal Keypad; Figure 4-4: Cursor Up Key Movement - California Instruments MX30-1 User Manual

User Manual – Rev AJ
4.1.6 DECIMAL KEYPAD
The decimal keypad may be used to enter any numeric parameter required in any of the men
fields. Several fields accept input from either the keypad or the knob. Data entered from the
keypad is normally accepted once the ENTER key is pressed unless the front panel mode is in
the SET mode. The following keys are available on the decimal keypad:
CURSOR UP
CURSOR DOWN
MX Series
ENTRY
7
8
4 5
1 2
0 .

Figure 4-3: Entering Values from the Decimal Keypad

The UP key moves the cursor position upwards one position
the previous available cursor position. If the present curs
position is at the top of the right hand column, the cursor is
moved to the bottom position of the left hand column. If the
present cursor is at the top of the left hand column, the cursor is
moved to the bottom of the right hand column. Figure 4-4
depicts the cursor movement through a two column menu.

Figure 4-4: Cursor UP Key Movement

The DOWN key moves the cursor position downwards one
position to the next available cursor position. If the present
cursor position is at the bottom of the left hand column, the
cursor is moved to the top position of the right hand column. If
the present cursor is at the bottom of the right hand column, the
cursor is moved to the top of the left hand column. Figure 4-5
depicts the cursor movement through a two-column menu.
California Instruments
9
6
E
3
N
T
E
R
u
to
or
79