Figure 4-25: Configuration Setup Menus - California Instruments MX30-1 User Manual

User Manual – Rev AJ
4.2.11.5 CONFIGURATION SETUP screens
The configuration setup screens are not menus but only serve to inform the user of the software
options insta lled in the AC source. The cursor can be moved to any of the fie
but none of these fields can be changed. The following information is provided on this screen:
Entry
NO. OUTPUT
ADVANCE
DO160
MIL704
IEC 4-11
IEC 4-13
CLOCK/LOCK
WH METER
114

Figure 4-25: CONFIGURATION SETUP Menus

Description
CONFIGURATION SETUP 1
Displays7 the phase mode option. SELECT indicates the phase
mode option is installed and the user can select between single
and three phase modes of operation.
FIXED indicates the phase mode option is not installed and onl
single phase or three phase mode of operation is possible.
[Pi Controllers only] This field indicates t
advanced capabilities for waveform generation and
measurement analysis are present.
Indicates the presence of the RTCA DO160 test option. If this
option is installed, this field will show ON. If this option is not
installed, this field will show N/A (not available).
Indicates the presence of the MIL/STD-704 Revision D and E
test option. If this option is installed, this field will show ON. If
this option is not installed, this fie
available).
CONFIGURATION SETUP 2
Indica tes the presence of the IEC 1000-4-11 test option. If this
option is installed, this field will show ON. If this option is not
installed, this field will show N/A (not available).
Indicates the presence of the IEC 1000-4-13 test option. If this
option is installed, this field will show ON. If this option is not
installed, this field will show N/A (
Indicates the presence of the -LKS clock and lock auxiliary
option. For units without -LKS, this field is set to N/A. For units
with the -LKS option installed, this field is set to ON. Note that
master unit (with -LKM) also has this field set to N/A.
Indicates the presence of the Watt Hour Meter option.
California Instruments
lds in this screen
he presence of
ld will show N/A (not
not available).
MX Series
y