User Manual - Rev AJ
•
410Hz for 5 sec.
•
407Hz for 4 sec.
LOW FR
EQUENCY
This test will change the output frequency in the following sequence:
•
375Hz fo
r 1 sec.
•
380Hz for 4 sec.
•
390Hz for 5 sec
•
393Hz for 4 s
9.6.1.7.3 EMERGENCY TEST
From the MIL704 ma
an down cursor
d
will appear as shown in Figure 9-36.
The EMERGENCY SCREEN has the following tests:
1
VOLTAGE
2
FREQUENCY
The above tests can be selected by scrolling to the highlighted selection using the up and down
key and the ENTER key to start the selected test.
VOLTAGE
This test will change the output voltage in the following sequence:
•
108V for 1 minu
•
118V for 1 minute.
•
115V for 1 minute.
The ← key (backspace
FREQU
ENCY
This test will change the output frequency in the following sequence:
•
393Hz for 1 minute.
•
407Hz for 1 minute.
•
400Hz for 1 minute.
e ← key (backspace) will terminate the test at any time.
Th
230
.
ec.
in menu (Figure 9-33) scroll to the EMERGENCY AC entry using the up
keys. Press the ENTER key to select the EMERGENCY screens. The screen
Figure 9-36: Emergency Menu
te.
) will terminate the test at any time.
California Instruments
MX Series