Figure 9-1: Application Menu - California Instruments MX30-1 User Manual

User Manual - Rev AJ
5. Frequency Modulation test
6. Momentary Power Interrupt (Undervoltage) test
7. Voltage Surge (Overvoltage) test
8. Frequency Transients test(Group 1 only)
Frequency Variation test (Group 2 and 3 only)
DC Source:
1. Normal State Voltage test
2. Momentary
3. Voltage Surge and Under
9 .3.1.3.2 EMER GE NCY
AC Sou rce:
1. Emergency Voltage and Frequency
2. Emergency Voltage and Frequency maximum
3. Voltage unbalance
DC Source:
1. Emergency Voltage
9.3.1.3.3 ABNORMAL TEST
A C So urce :
1. Abno
2. A bn
3. V olta
4. Voltage Surge
5. Frequency Transients test (group 1 only)
DC Source:
1. Abnormal Voltage minimum
2. Abnormal Voltage maximum
3. Abnormal Voltage low
4. Voltage Drop
5. Voltage Surge
9.3.1.4 Front Panel Entry
To perform a test from the keyboard, from the MENU 2 screen, select the APPLICATIONS
screen. The APPLICATIONS screen will appear as shown in Figure 9-1.
192
Power Interrupt (Undervoltag ) test
TEST
rm al V tage ol m inim m u
orm Volt al ag e m imu ax m
ge Dr op

Figure 9-1: Application Menu

e
min imum
California Instruments
MX Series