Figure 9-32: Application Menu - California Instruments MX30-1 User Manual

User Manual - Rev AJ
8. Transient Frequency low and high test
DC Mode:
1. Steady State Voltage test
2. Ripple test
9.6.1.4.2 EMERGENCY TEST
AC Mode:
1. Emergency Voltage minim
2. Emergency Frequency minimum and maximum
D M C ode:
1 . Emergency Voltage minimum and maximum test
9.6.1.4.3 A BN ORMAL TEST
AC Mode:
1. Abnormal Voltage under
2. Ab normal Voltage over
3. Abnormal Frequency under
4. Abnormal Frequency under
DC Mode:
1. Abnormal Voltage under
2. Abnormal Voltage over
9.6.1.5 Front Panel Entry
To perform a test from the keyboard, from the MENU 2 screen, select the APPLICATIONS
screen. The APPLICATIONS screen will appear as shown in Figure 9-32.
Scroll to the MIL-STD-704 entry using the up and down cursor keys. Press the ENTER key to
select the MIL704 main menu. One of the screens will appear a
voltage mode and setting will define which menu to select. Refer to Section 9.6.1.2
Note: The user has to turn on the Output relay before starting a test a
setup for the test.
226
um and maximum test
test

Figure 9-32: Application Menu

California Instruments
s shown in Figure 9-33. The
nd set the steady state
MX Series