Figure 9-28: Iec 61000-4-13 Test Flowchart Class 1 And 2 - California Instruments MX30-1 User Manual

User Manual - Rev AJ
9.5.4.3 RUNNING THE TEST
The test seq uence used is a function of the EUT class. The end user needs to determine the
appropriate class of EUT. The test protocol is document in the IEC 61000-4-13 test standard.
For reference, the test flow charts are shown here. It is assumed that the end user has a copy of
the actual test standard however.
Start - Class 1/2
Determine appropriate test
conf iguration
Perform 8.2.1 Test
"Harmonic combination"
Flatcurve and Overswing
Any functional
anomalies?
Yes
Test Completed
FAIL
R ecord Results
220
No
Class 2
required?
No
Perform 8.2.2 Test
"Frequency Sweep"
Any functional
Perform 8.2.3 Test
"Individual Harmonics/
Interharmonics"
Yes
Any functional
Figure 9-2 8: IEC 61000-4-13 Test Flowchart Class 1 and 2
'Meister
Yes
curve' req uired?
No
anomalies?
No
Yes
Yes
No
anomalies?
California Instruments
Yes
Perform 8.2.4 Test
"Meister Curve"
Any functional
anomalies?
No
Test Completed
PASS
Record Results
MX Series