Figure 4-26: Output Impedance Menu - California Instruments MX30-1 User Manual

User Manual – Rev AJ
4.2.12 OUTPUT IMPEDANCE Menu
The MX30-3Pi and
operation. This allows the user to simulate line impedance conditio
and inductive elements of the AC source's output impedance.
Note: No programmable impeda
system configurations other than the MX35-3Pi.
The OUTPUT IMPEDANCE menu can be accessed from MENU 3. The following fields are
available in this menu:
Entry
RESISTIVE
INDUCTIVE
SET MINIMUM
Note: The Programmable Impedance
exclusive with the Automatic Voltage Level Control (ALC) mode of operation. One
must be turned off the e
116
[MX30-3Pi or MX45-3Pi Model in 3 phase mode only]

Figure 4-26: OUTPUT IMPEDANCE Menu

MX45-3Pi offers programmable output impedance in three-phase mode of
nce function is available in single phase mode or on MX
Description
Sets the resistive component of the output imped
(The lower limits for the resistive and inductive components
may vary on different AC source models and are set as part of
the source calibration.)
Sets the inductive component of the output impedance.
(The lower limits for the resistive and inductive components
may vary on different AC source models and are set as part of
the source calibration.)
Selecting this field and pressing the ENTER key sets both
impedance c
effectively tur
function of the MX30-3Pi or MX45-3Pi is mutually
nable the other.
ns by programming resistive
omponents to their minimum values. This
ns the programmable impedance function off.
California Instruments
ance.
MX Series