Figure 4-2: Function Keypad - California Instruments MX30-1 User Manual

User Manual – Rev AJ
4.1.5 FUNCTION Keypad
The function keypad provides ac
keys are located in the FUNCTIO
KEY
MENU
PROG
WAVE
MEAS
MX Series
cess to all menus and measurement screens. The following
N keypad:
FUNCTION
MENU PROG
OUTPUT
PHASE
ON/OFF

Figure 4-2: FUNCTION Keypad

DESCRIPTION
The top level menu is accessed by pressing the MENU key.
Three shortcut keys are used to provide direct access to the
PROGRAM, WAVEFORM, and MEASUREMENT screens as
these are among the most frequently used screens. Thus,
instead of going through the main menu to reach the
PROGRAM, WAVEFORM, and MEASUREMENT screens, they
can be accessed directly by pressing the PROG, WAVE, and
MEAS keys respectively. A map of the Main menus is provided
on the next few pages. There are three top level menus in the
MX Series.
The PROG key is a shortcut to access the PROGRAM menu
directly. The PROGRAM menu is one of the most frequently
used menus. Thus, instead of going through the main menu to
reach the PROGRAM menu, it can be accessed directly by
pressing the PROG key.
The WAVE key is a shortcut to access the WAVEFORM screen
directly. The WAVEFORM screen is used to select a user
defined arbitrary waveform.
The MEAS key is a shortcut to access the MEASUREMENT
screen directly. The MEASUREMENT screen is one of the most
frequently used screens. Thus, instead of going through the
main menu to reach the MEASUREMENT screen, it can be
accessed directly by pressing the MEAS key.
California Instruments
WAVE MEAS
SET
+/-
(3Pi controller only)
77