Figure 4-18: Applications Menu - California Instruments MX30-1 User Manual

User Manual – Rev AJ
4.2.8 ADVANCE MEAS. Menu [3Pi Controller only]
This entry in the MENU 2 screen displays the HARMONICS/TRACE ANALYSIS screen which is
covered in section 0. This field can be used in lieu of the MEAS key to directly bring up the
advanced measurements screens.
4.2.9 APPLICATIONS Menu
The APPLICATIONS
test sequences. Since these tes
none of the options are installed
menu:
Entry
MIL-STD 704
O MNI OPTION
RTCA/DO-160
IEC-1000-4-11
IE C-1000-4-13
WH METER
MX Series
Figu re 4-18: APPLICATIONS Menu
menu prov ides access to the optional application specific pre-programme
t sequences are optional, this menu may have no choices if
. The following entries may be found in the APPLICATIONS
Description
Test sequence for MIL standard 704 AC and DC tests.
This entry selects the OMNI control menu. The OMNI option
provides a lumped reference impedance for use in IEC 61000
3-3 or IEC 61000-3-11 Flicker test applications. If the OMNI
option is installed, this screen allows the impedance to b
ENGAGED or BYPASSED.
Test sequence for RTCA DO160 commercial aviation AC and
DC tests.
Test sequences for IEC 61000-4-11 Voltage Dips and
Variations test standard.
Test sequence for IEC 61000-4-13 Harmonics and Inter
harmonics test standard.
Watt Hour meter measurement option. Tracks energy usage
over a period of time and calculates Watt Hours used.
California Instruments
d
-
e
103