Supplemental Specifications - California Instruments MX30-1 User Manual

User Manual – Rev AJ

2.7 Supplemental Specifications

Supplemental specifications are not warranted and generally reflect typical performance
characteristics. These characteristics are have been checked on a type test basis only and are
not verified on each unit shipped. They are provided for reference only.
2.7.1 Output
Output Parameter
Voltage:
Slew rate:
Stability:
Settling time:
Frequency:
Temperature
coefficient:
Stability:
Current:
Constant Power
Mode:
2.7.2 Acoustic Noise Levels
Acoustic Noise:
Front
Back
MX Series
MX30 MX45
> 0.5 V/micro sec
0.25 % over 24 hour period at constant line, load and temperature.
< 0.5 msec
± 5ppm per degree C
± 15 ppm per year
Operation at higher currents but constant power is possible from 80% of
Voltage range (125% of max. current) declining to 100% of maximum current
at 100 % of voltage range for short periods of time or at reduced ambient
temperatures. (< 15 mins @ 30° C). See Figure 2-3 and Figure 2-4.
Note: This mode requires firmware revision 0.27 or higher.
Measured at a distance of one meter. (3 ft.)
63 dBA at no load to 68 dBA at full load.
65 dBA at no load to 72 dBA at full load
California Instruments
MX60 MX90 MX135
31