Figure 4-24: Limit Setup Menu - California Instruments MX30-1 User Manual

User Manual – Rev AJ
4.2.11.4 LIMIT SETUP screen
The limit setup screen is not a menu but only serves to inform the user of the hardware
capabilities of the AC source. The cursor can be moved to any of the fields in this screen but
none of these fields can be changed. The following informatio
Entry
VOLTAGE
CUR LIMIT
FREQ LO
FREQ HI
PHASE C
MX Series

Figure 4-24: LIMIT SETUP Menu

Description
Maximum AC rms or DC voltage available in the high voltage
range.
Maximum AC rms current limit available in the low voltag
range.
Lowest possible fundamental frequency that can be
programmed.
Highest possible fundamental frequency that can be
programmed.
Phase angle of phase C with respect to phase A in three phase
mode. If the AC source i
shown 0°. If the AC source is a split phase model, this field
shown 180°.
California Instruments
n is provided on this screen:
s a single phase model, this field will
e
will
113