User Manual
5. Voltage Surge
9.4 Front Panel Operation -160
To perform a test fro
APPLICATIONS/OP
screen will appear as shown in Figure 9-1.
Scroll to the RTCA/DO-160D entry using the up and down cursor keys. Press the ENTER key to
select the RTCA/DO 160D main menu. The screen will appear as shown in Figure 9-2.
Note: The user has to turn on the Output relay before starting a test.
Prior to executing a test, selection of the desired test standard and group is required. Use the shuttle
to select the standard and the group if applicable.
California Instruments
m the keyboard, Press the MENU key several times until the
TIONS Menu appears, select the APPLICATIONS screen. The APPLICATIONS
Figure 9-1: Application Menu
Fig
ure 9-2: DO160 Main Menus
2253i / 2253iX
113