GE B30 Communications Manual page 461

CHAPTER 3: IEC 61850 COMMUNICATION
Table 3-228: PIXIT for Server model
ID Edition
Sr1 1,2
Sr2 1,2
Table 3-229: PIXIT for Setting group control model
ID Edition
Sg2 1,2
Sg6 2
Table 3-230: PIXIT for Reporting model
ID Edition
Rp3 1,2
Rp4 1,2
Rp7 1,2
Rp10 1,2
Rp12 2
UR FAMILY – COMMUNICATIONS GUIDE
Edition
Which analogue value (MX) quality bits are
supported (can be set by server)?
Which status value (ST) quality bits are
supported (can be set by server)?
Description
What is the effect of when and how the non-volatile storage is updated
(compare IEC 61850-8-1 16.2.4)?
When ResvTms is not present how long is an edit setting group locked?
Description
Can the server send segmented reports?
Mechanism on second internal data change notification of the
same analogue data value within buffer period (Compare IEC
61850-7-2 14.2.2.9)
What is the buffer size for each BRCB or how many reports can
be buffered?
What is the scan cycle for binary events?
Is this fixed, configurable?
After restart of the server is the value of ConfRev restored from
the original configuration or retained prior to restart?
PIXIT CONFORMANCE STATEMENT
Value / Clarification
Validity:
Y Good
Y Invalid
N Reserved
Y Questionable
N Overflow
N OutofRange
N BadReference
N Oscillatory
N Failure
N OldData
N Inconsistent
N Inaccurate
Source:
Y Process
N Substituted
Y Test
N OperatorBlocked
Validity:
Y Good
Y Invalid
N Reserved
Y Questionable
N BadReference
N Oscillatory
N Failure
N OldData
N Inconsistent
N Inaccurate
Source:
Y Process
N Substituted
Y Test
N OperatorBlocked
Value / Clarification
Not applicable
60 seconds
Value / Clarification
Y
Send report immediately
36864 bytes
All Boolean and Dbpos type
values in "fast" datasets are
scanned for 1/8 cycle (2.0 ms
at 60 Hz, 2.5 ms at 50 Hz).
All values in "slow" datasets
are scanned for every 100
ms.
Fixed
Retained prior to restart
3
3-223