Scl Logging; Overview Of Process - GE B30 Communications Manual

CHAPTER 3: IEC 61850 COMMUNICATION
Part 7 Tissue Description
743 CCGR.PmpCtl and CCGR.FanCtl
744 LN STMP, EEHealth and EEName
773 Loc, LocKey and LocSta YPSH and YLTC
774 ITCI.LocKey
800 Misspelling in CSYN
802 CCGR and Harmonized control authority
808 Presence condition of ZMOT.DExt and new Dos
831 Setting of ConfRevNum in LGOS
838 Testing in Beh=Blocked
844 MFLK.PhPiMax, MFLK.PhPiLoFil, MFLK.PhPiRoot DEL->WYE
849 Presence conditions re-assessing in case of derived statistical
calculation
877 QVUB -settings should be optional
909 Remove ANCR.ColOpR and ColOpL
920 Resettable Counter is NOT resettable
932 Rename AVCO.SptVol to AVCO.VolSpt
939 Change CDC for ANCR.FixCol
991 LGOS: GoCBRef (as well as LSVS.SvCBRef) should be mandatory
1007 PTRC as fault indicator - Update of description required
1044 TapChg in AVCO
1077 Rename DOnames within LTIM
Table 3-239: Part 8 Tissues
Part 8-1 Description
Tissue
784 Tracking of control (CTS)
817 Fixed-length GOOSE float encoding
834 File dir name length 64
951 Encoding of Owner attribute
1040 More associate error codes
1178 Select Response+ is non-null value
1324 The response- for DeleteNamedVariableList is not defined

3.9 SCL logging

3.9.1 Overview of process

The process of creating a CID file to import into a UR is described in the
As described, the file can be created using EnerVista software or other, third party IEC 61850 configuration software. The
file transfer to the UR can be done by EnerVista or another client using one of the specified protocols. Upon receipt of the
complete CID file, the UR attempts to parse the file, extract the configuration data and settings that it requires, verify the
data, and then apply the data. During the data application process, the UR is taken out of service automatically if required.
When complete, the UR goes back to its previous in-service or out-of-service state.
During this entire process, an internal log file in the UR is updated to provide information and possibly error logs that can
be used to check the outcome of the process. Transfer this log file from the UR and examine it. This happens automatically
if EnerVista is used to import the CID file to the UR.
UR FAMILY – COMMUNICATIONS GUIDE
Implemented by server?
na
Y
na
na
na
na
na
Y
Y
na
na
na
na
Y
na
na
Y
Y
na
na
Implemented by server?
na
na
Y
na
Y
Y
na
Configuring the UR using SCL
SCL LOGGING
section on page 3-18.
3-229
3