Protocol Monitor Output Example - GE Multinet 4 Instruction Manual

THE CLI AND PROTOCOL MONITOR
CMD
start
start
5–14
Table 5–9: Protocol Monitor Command Set
Synopsis
Begin monitoring. Once the command has been issued, packets will
be displayed. You can pause the display by pressing the Enter key.
You can abort the monitor and return to the CLI by pressing the ESC
key:

5.2.2.7 Protocol Monitor Output Example

For an Ethernet port with the Protocol Monitor configured as shown in the figure below:
FIGURE 5–2: Protocol Monitor Example Configuration
Sample output is illustrated in the figure below.
FIGURE 5–3: Protocol Monitor Example Output
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
CHAPTER 5: THE CLI AND PROTOCOL MONITOR
Description