Exiting - GE MultiLink ML1200 Instruction Manual

INTRODUCTION

1.4.10 Exiting

1–14
?
alarm
clear
enable
exit
help
logout
ping
set
show
telnet
terminal
walkmib
whoami
ML1200>
The following example lists commands starting with a specific string:
ML1200>
s <TAB>
set
show
ML1200>
In the following example, the <TAB> key completes the command:
ML1200>
se<TAB>
password
timeout
vlan
ML1200>
set
To exit from the CLI interface and terminate the console session use the
command. This command prompts to ensure that the logout was not mistakenly typed.
The following syntax applies:
logout
The following example illustrates logging out from a session:
ML1200>
logout
Logging out from the current session ['Y' or 'N']
Connection to the host lost
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
CHAPTER 1: INTRODUCTION
logout
Y