Table of Contents
Advertisement
TOOLBOX SCREENS
Use the Toolbox screens to program the Control
Panel. Users can access basic programming
functions. Installers can access basic and Installer
Toolbox functions. Enter a valid code to access the
programming functions in the toolbox.
1
From the Menu Screen, press the Toolbox
button. The system displays a Code Entry
Screen. Entering a correct user code displays
Toolbox Screen 1.
2
Use the arrow buttons to display Toolbox
Screens 2 and 3.
Each Toolbox Screen has option buttons that
3
display sub‐menus. Access the Installer
Toolbox from Toolbox Screen 3.
INSTALLER CODE ENTRY
The Installer Toolbox button enables accesses to
the Installer Toolbox used to program the system.
Before access to the Installer Toolbox is allowed,
installers must enter their installer code in the
Installer Code Entry Screen. The installer code does
not disarm the system.
TIP:
A special shortcut helps the installer
access the Installer Toolbox quickly.
Pressing the logo in the lower right corner
of the Home Screen while the system is
disarmed displays a code entry screen.
When the correct Installer Code is entered,
the system displays the Installer Toolbox.
INSTALLER TOOLBOX SCREEN
The Installer Toolbox Screen displays system setup
and testing buttons. Main programming is accessed
using the System Configuration button. The other
buttons support system tests and resetting the
Control Panel to its programming default values.
SYSTEM CONFIGURATION
•
To begin programming, press the System
Configuration. The Control Panel displays
questions used for each programming step.
To help the installer program the Control
TIP:
Panel quickly, the questions are arranged
so that the most commonly used values
appear early in the question order.
©2013 2GIG Technologies Inc. All Rights Reserved.
19
Advertisement
Table of Contents
Need help?
Do you have a question about the Go Control and is the answer not in the manual?
Questions and answers