Toolbox Screens; Installer Code Entry Screen; Installer Toolbox Screen; System Confi Guration Screen - 2gig Technologies Go!Control 2GIG-CNTRL2 Installation & Programming Instructions

Toolbox Screens

The Control Panel is programmed using the "toolbox" screens.
Users can access basic programming functions. Installers can
access basic and Installer Toolbox functions. Users and installers
must enter a valid code to access the programming functions in
the toolbox. Other functions do not require entering a code.
Toolbox Screens
From the Menu Screen, when the TOOLBOX button is pressed, the
system will ask for a User Code then display Toolbox Screen one.
The arrow button displays Toolbox Screens two and three. Each
Figure 25. Toolbox Screen One
Toolbox Screen shows option buttons that display sub-menus.

Installer Code Entry Screen

The INSTALLER TOOLBOX button goes to the main programming
area of the Control Panel and can only be accessed by the installer
while the system is disarmed by entering a correct access code.
THE INSTALLER CODE CANNOT DISARM THE SYSTEM.
The system features a special shortcut to help the installer access
the Installer Toolbox quickly. Pressing the lower right corner of
the Home Screen while the system is disarmed will immediately
display a code entry screen. When the correct Installer Code is
Figure 26. Toolbox Screen Two
entered, the system will go directly to the Installer Toolbox.

Installer Toolbox Screen

The Installer Toolbox Screen displays system setup and testing
buttons. Main programming is accessed using the SYSTEM
CONFIGURATION button. The other buttons support system tests
and resetting the Control Panel to its programming default values.
System Confi guration Screen
When the SYSTEM CONFIGURATION button is pressed, the Control
Panel will display questions for each programming step. To help
the installer program the Control Panel quickly, the programming Figure 27. Toolbox Screen Three
questions are arranged so that the commonly set values appear
early in the question order.
Figure 28. Installer Toolbox Code Entry Screen
Figure 29. Installer Toolbox Screen
Figure 30. System Confi guration Question "Q-1"
13