Commercial Regulatory Listings - 2gig Technologies Go Control Install Manual

Go!Control Wireless Security System | Install Guide
Repairs to certified equipment should be made by
an authorized Canadian maintenance facility
designated by the supplier. Any repairs or
alterations made by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to request the
user to disconnect the equipment.
Users should ensure for their own protection that
the electrical ground connections of the power
utility, telephone lines and internal metallic water
pipe system, if present, are connected together.
This precaution may be particularly important in
rural areas.
CAUTION: Users should not attempt to make such
connections themselves, but should contact the
appropriate electric inspection authority, or
electrician, as appropriate.
Commercial Regulatory Listings
IMPORTANT: If this installation is a commercial
installation, please inform the customer (or end
user) that commercial Control Panels are for use
only as burglar alarm systems (and not for fire
protection) under UL 1610.
All conductors and attachments are manufactured
in accordance with the Standard for Installation
and Classification of Burglar and Holdup Alarm
Systems (UL 681). Commercial users must provide
for the connection of protective wiring, conductors
and attachments.
The Control Panel contains hard wiring that is
protected and not exposed. All conductors and
attachments are manufactured in accordance with
the Standard for Installation and Classification of
Burglar and Holdup Alarm Systems (UL 681).
Stranded conductors clamped under wire‐binding
screws or similar parts shall have the individual
strands soldered together or arranged in a
construction that has been determined to be the
equivalent.
IMPORTANT: A local alarm sounding device, alarm
housing, and control unit shall comply with the
mercantile requirements in the Standard for
Police Station Connected Burglar Alarm Units
and Systems, UL 365
Operating and Storage Temperature
The recommended storage temperature for all
Control Panels is ‐10°C to 60°C (14°F to 140°F).
For optimal Control Panel use, operation
temperature is 0°C to 49°C (32°F to 120°F).
62 ©2013 2GIG Technologies Inc. All Rights Reserved.
.
No altitude range limitations have been
NOTE:
reported while transporting Control
Panels.
LIMITED WARRANTY
This 2GIG Technologies Inc. product is warranted
against defects in material and workmanship for 1
year. This warranty extends only to wholesale
customers who buy through 2GIG Technologies Inc.
authorized distribution channels.
2GIG Technologies Inc. does not warrant this
product to consumers. Consumers should inquire
from their selling dealer as to the nature of the
dealer's warranty, if any. There are no obligations
or liabilities on the part of 2GIG Technologies Inc.
for consequential damages arising out of or in
connection with use or performance of this
product or other indirect damages with respect to
loss of property, revenue, or profit, or cost of
removal, installation, or reinstallation. All implied
warranties, including implied warranties for
merchantability and implied warranties for fitness,
are valid only until the warranty expires. This 2GIG
Technologies Inc. Warranty is in lieu of all other
warranties express or implied.
For technical support in the USA and Canada:
855‐2GIG‐TECH (855‐244‐4832)
Email: techsupport@2gig.com
Internet: dealer.2gig.com
Visit web site for technical support hours of operation
For technical support outside of the USA and
Canada:
Contact your regional distributor
Visit dealer.2gig.com for a list of distributors in your region