Pnp/Pci Configuration - AXIOMTEK SBC81870 Series User Manual

4.8

Pnp/Pci Configuration

Choose 〝PNP/PCI CONFIGURATION〞 from the main menu,
a display will be shown on screen as below:
Phoenix - AwardBIOS CMOS Setup Utility
Reset Configuration Data [Disabled]
Resources Controlled By
X IRQ Resources
x DMA Resource
PCI/VGA Palette Snoop
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit
F5: Previous Values
F1:General Help
F7:Optimized Defaults
PNP/PCI Configuration Setup Screen
The PNP/PCI Configuration Setup describes how to configure
PCI bus system. PCI, also known as Personal Computer
Interconnect, is a system, which allows I/O devices to operate
at speeds nearing the speed of the CPU itself uses when
communicating with its own special components.
This section covers technical items, which is strongly
recommended for experienced users only.
RESET CONFIGURATION DATA:
Normally, you leave this field Disabled. Select Enabled to
reset Extended System Configuration Data (ESCD) when you
exit Setup if you have installed a new add-on and the system
configuration has caused such a serious conflict that the
operating system cannot boot.
Award BIOS Setup
®
SBC81870 Intel Pentium
PnP/PCI Configurations
[Auto (ESCD)]
Press Enter
Press Enter
[Disabled]
F6: Fail-Safe Defaults
®
M w/ DDR/VGA/Dual LAN
Item Help
Menu Level ►
Select Yes if you are
using a Plug and Play
capable operating
system Select No if
you need the BIOS to
configure non-boot
devices
75